|
|
|||||||||||||||||||||||||||
| Electrical Specifications |
20D20X NTSC |
21D20X PAL |
| Image Sensor | 1/3” IL
CCD |
|
| Picture Elements | 768 x 492 |
752
x 582 |
| Resolution | 480
TVL |
|
| Sensitivity | 0.5
Lux (50 IRE) f1.2, 3200°K |
|
| Signal To Noise Ratio | >48
dB (AGC off) |
|
| Gamma | 0.45 |
|
| Gain Control | AGC 36dB |
|
| Synchronization | Internal
(crystal controlled) |
|
| Scan Mode | Interlaced |
|
| Backlight Compensation | On (off via jumper) |
|
| White Balance | AWB |
|
| Contour Enhancement | On |
|
| Iris Controls | Electronic |
|
| Video Output | Composite
1Vp-p CVBS (75 ohms) Balanced video output option @ 100 ohms (20D20XB) |
|
| Power Supply | +12VDC
(+/- 10%) |
|
| Power Consumption | < 1.0W |
|
| Environmental Specifications (Internal) | |
| Operating Temperature | -15° C
~ 55° C (5° F ~ 131° F) |
| Storage Temperature | -30° C ~ 80° C (-22° F
~ 176° F) |
| Operating Humidity | 20 to 93% RH |
| Storage Humidity | Up to 98% RH |
| Lifetime | MTBF >150000
hours |
| Packaging | Metalized, conductive bags |
| Warning: Avoid aiming the camera at the sun or other extremely bright lights. The CCD image sensor may be damaged if exposed to very bright objects. | |
| Mechanical Specifications | |||
| Dimensions (WxHxD) | 32mm x 32mm x 18.14mm
w/ pinhole mount (1.26” x 1.26” x 0.71”) |
||
| Weight | 8.9g
(0.020 lbs) |
||
| Lens mount | Replace
“X” in model number with desired lens mount option: |
||
| Example: Change 20D20X to 20D205 to select an M-12 Board Mount. |
8 = Metal CS Board |
5 = Metal M-12 Board |
2 = Metal M-12 Pinhole |
| Accessories | |||
| Cable (J4) |
70V0213 3-pin AMP unterminated |
||
| Models (Minimum 100 Piece Lot Size Required) | ||
| 20/21D20XB |
Balanced video output
via 8-pin connector |
|
| 20/21D20XS | Sony Ex-View®, color high resolution
CCD (sensitivity to 0.05 lux), composite output, I²C OEM Control via 8-pin connector |
|
| X = lens mount option (refer to Mechanical) Please contact your Videology sales representative for details. | ||