Print Data Sheet
 
 
Back To List Back To List

Blue Sky Series 1/3" CCD Color Board Camera With OEM Connector
20D2OXS / 21D20XS Series Features
20D20XS, 21D20XS
  • 1/3” Sony Ex-View® Color CCD (480 TVL)
  • 0.05 Lux Sensitivity
  • Miniature 32mm x 32mm Single Board Camera
  • Aerospace B&W Version Available
    (See 20D35XO)
  • Options Available With 8-pin Connector
    (Minimum 100 Piece Lot Size Required)
    - Balanced Video Output For CAT5/CAT6 Transmission (Via 8-pin Connector)
  • Computer Controllable Via I²C

20D20XS dimensions
OEM Options (Via I²C 8-pin Connector)
  • Gamma & Gain Control
  • Scan Mode for non-interlaced setting
  • Mirror Mode Preset
  • Backlight Compensation can be turned off (Via Connector Interface)
  • White Balance has 3 fixed modes
  • Shutter Speed Control
  • I²C Communication
Technical Specifications
Electrical Specifications
20D20XS NTSC
21D20XS PAL
Image Sensor
1/3” Sony Ex-View® CCD
Picture Elements
768 x 492
752 x 582
Resolution
480 TVL
Sensitivity
0.05 Lux (50 IRE) f1.2, 32000K
Signal To Noise Ratio
>48 dB (AGC off)
Gamma
0.45
Gain Control
AGC 36dB
Synchronization
Internal (crystal controlled)
Scan Mode
Interlaced
Backlight Compensation
on (off via jumper)
White Balance
AWB
Contour Enhancement
On
Iris Controls
Electronic
Video Output
Video Output Composite 1Vp-p CVBS @75 ohms
Balanced video output option @ 100 ohms (20D20XB)
Power Supply
+12VDC (+10% / -20%)
Power Consumption
< 1.0W
Environmental Specifications (Internal)
Operating Temperature
-15° C ~ 55° C (5° F ~ 131° F)
Storage Temperature
-30° C ~ 80° C (-22° F ~ 176° F)
Operating Humidity
20 to 93% RH
Storage Humidity
Up to 98% RH
Lifetime
MTBF >150000 hours
Packaging
Metalized, conductive bags
Warning: Avoid aiming the camera at the sun or other extremely bright lights.
The CCD image sensor may be damaged if exposed to very bright objects.
Mechanical Specifications
Dimensions (WxHxD)
32mm x 32mm x 18.14mm w/ pinhole mount (1.26” x 1.26” x 0.71”)
Weight
8.9g (0.020 lbs)
Lens mount
Replace “X” in model number with desired lens mount option:
Example:
Change 20D2XS to 20D205S to select an M-12 Board Mount.
8 = Metal CS Board
5 = Metal M-12 Board
2 = Metal M-12 Pinhole
cs mount
board mount
pinhole mount
Connectors
x1 8 pole JST connector, vertical
x1 8 pole JST connector, horizontal
Software
Software control program available for I²C SFT-03001
Accessories
Cable (J1)
60C1041 8-pin AMP unterminated
Models (Minimum 100 Piece Lot Size Required)
20/21D20XB
Balanced video output
 
X = lens mount option (refer to Mechanical) Please contact your Videology sales representative for details.