Print Data Sheet
Application Note
 
Back To List Back To List

Blue Sky Series 1/3” CCD B&W Board Camera
20D35X / 21D35X Series Features
20D35X, 21D35X
  • 1/3" B&W Sony Ex-View® CCD (570 TVL)
  • 0.005 Lux Sensitivity
  • Miniature 32mm x 32mm Single Board Camera
  • Aerospace B&W Version Available (See 20D35XO)
  • Many Options Available With 8-pin Connector Using Alternate Models Listed Below
    - Balanced Video Output For CAT5/CAT6 Transmission (Via 8-pin Connector)

20D35X schematic
Technical Specifications
Electrical Specifications
20D35X NTSC
21D35X PAL
Image Sensor
1/3” Sony Ex-View® CCD
Picture Elements
768 x 492
752 x 582
Resolution
570 TVL
Sensitivity
< 0.005 Lux (50 IRE) f1.2, 3200°K
Signal To Noise Ratio
>48 dB (AGC off)
Gamma
0.45
Gain Control
AGC 36dB
Synchronization
Internal (crystal controlled)
Scan Mode
Interlaced
Backlight Compensation
Default On
Contour Enhancement
On
Iris Controls
Electronic
Shutter Speed
1/60 to 1/100,000
1/50 to 1/100,000
Video Output
Video Output Composite 1Vp-p (75 ohms)
20/21D35XB - Balanced Video Output
Power Supply
+12VDC (+/- 10%)
Power Consumption
< 1.5W
Environmental Specifications (Internal)
Operating Temperature
-15° C ~ 55° C (5° F ~ 131° F)
Storage Temperature
-30° C ~ 80° C (-22° F ~ 176° F)
Operating Humidity
20 to 93% RH
Storage Humidity
Up to 98% RH
Lifetime
MTBF >150000 hours
Packaging
Metalized, conductive bags
Warning: Avoid aiming the camera at the sun or other extremely bright lights.
The CCD image sensor may be damaged if exposed to very bright objects.
Mechanical Specifications
Dimensions (WxHxD)
32mm x 32mm x 18.14mm w/ pinhole mount (1.26” x 1.26” x 0.71”)
Weight
8.9g (0.020 lbs)
Lens mount
Replace “X” in model number with desired lens mount option:
Example:
Change 20D35X to 20D355 to select an M-12 Board Mount.
8 = Metal CS Board
5 = Metal M-12 Board
2 = Metal M-12 Pinhole
cs mount
board mount
pinhole mount
Accessories
Cable (J4)
70V0213 3-pin AMP unterminated via 8-pin connector
Models
20/21D35XB
Balanced video output via 8-pin connector
20/21D35XO
OEM option, I²C controllable
X = lens mount option (refer to Mechanical) Please contact your Videology sales representative for details.