|
 |
|
|
|
||||||||||||||||||||||||
| Electrical Specifications |
20E407T3 NTSC
|
21E407T3 PAL
|
| CCD Sensor |
1/3” Sony CCD
Imager
|
|
| Active Pixels (HxV) |
768 x 492
|
768 x 585 |
| Horizontal Resolution |
550 TVL
|
|
| Sensitivity |
30 IRE 0.3 lux (F1.2) (Color)
|
|
|
30 IRE 0.01 lux
(F1.2) (B&W)
IR filter is removed by gen III lens mount mechanism at preset light level |
||
| Signal To Noise Ratio |
46 dB or more (AGC off)
|
|
| Gamma |
0.45
|
|
| Synchronization |
Internal
|
|
| Iris Control |
DC iris + Electronic Shutter
|
|
| Video Output |
1Vp-p Composite 75 Ohms
|
|
| Power Supply |
12VDC (8VDC~18VDC)
|
|
| Power Consumption |
<3W or less
|
|
| Environmental Specifications (Internal) | |
| Ambient Operating Temp. | -10° C ~ 55° C (14° F ~ 131° F)
|
| Ambient Operating Humidity | 90% non-condensing
|
| Storage Temp. | -25° C ~ 70° C (-13° F ~ 158° F)
|
| Storage Humidity | 95% non-condensing
|
| Mechanical Specifications | ||
| Dimensions (LxWxD) | 38mm x 38mm x 30mm
double board
(1.49” x 1.49” x 1.19”)
|
|
| Weight | 33g (without lens)
|
|
| Lens Options | 20E407T3-WB | 2.6~6mm lens DC iris,
F1.4
|
| 20E407T3-VB | 4~9mm DC iris, F1.4
|
|
| 20E409T3 | CS mount
Note: board lens connector adaptation needed to use 4-pole CS lens connectors. |
|
| Accessories | |
| Optional | 24VAC power board |
| Complementary Models | 20/21E407 Standard Double Board Camera |
20/21E407TW Wide Dynamic Range Camera |
|
20/21E407TW3 Wide Dynamic Range & True Day/Night Camera |
|
