|
 |
|
|
|
|||||||||||||||||||
| Electrical Specifications |
20K13XUSB-C EIA |
21K13XUSB-C CCIR |
| CCD Sensor | 1/4” Sony
Ex-View® CCD |
|
| Active Pixels (HxV) | 768 x 494 |
752 x 582 |
Viewer Display (USB 2.0, 30fps) |
720 x 480 pixels max |
720 x 576 pixels max |
| Sensitivity | <0.005 Lux, near IR sensitive |
|
| Signal to Noise Ratio | > 48 dB (AGC off) |
|
| Gamma | 0.45 default (1.0 via Software) |
|
| Gain Control | Automatic 36 dB (AGC default) or
Fixed options via software |
|
| Scan Mode | Interlaced / Non Interlaced
(selectable via Software) |
|
| Mirror Mode | Selectable via software |
|
| Synchronization | Internal |
|
| Back Light Compensation | Default off (selectable via software) |
|
| Contour Enhancement | Default on |
|
| Iris Control | CCD Iris default |
|
| Shutter Speeds | Automatic from
1/60 to 1/100,000 |
Automatic from
1/50 to 1/100,000 |
14 fixed speeds via software |
||
| Control Communication | Camera control via USB bus |
|
| Power Supply | 5VDC via USB bus |
|
| Power Consumption | < 1.3 W |
|
Note: Camera is not USB 1.1 compliant |
||
| Environmental Specifications (Internal) | |
| Ambient Operating Temp. | -15° C ~ 55°
C (5° F ~ 13° F) |
| Storage Temp. | -25° C ~ 70°
C (-13° F ~ 158° F) |
| Ambient Operating Humidity | 20 up to 93%RH |
| Storage Humidity | Up to 98%RH |
| Lifetime |
MTBF > 150000 |
| Packaging | ESD safe package |
| Mechanical Specifications | |||
| Dimensions (WxHxD) | 26mm
x 22mm x 16mm (1.02" x 0.86 x 0.62") (without lens mount) |
||
| Lens Mount | Replace
“X” in model number with desired lens mount option: |
||
| Example: Change 20K13XUSB-C to 20K135USB-C to select an M-12 Board Mount. |
8 = Metal CS Board |
5 = Metal M-12
Board |
2 = Metal M-12
Pinhole |
 |
 |
 |
|
| Connectors | Camera to USB board: Board to board connector Connectors | ||
| USB board connector: (6 pin) power & data | |||
| Software | ||
|
||
| Installation software SFT-07019 |
Camera
Device Driver Viewer (GUI) User's Manual |
|
| SDK SFT-07019-SDK |
Complete
software development kit and support for OEMs |
|
| Minimum System Requirements | ||
| Hardware | Pentium IV | 1.8GHz (2.3GHz + recommended) |
| 512MB of RAM (1GB recommended) | ||
| High speed USB Host controller | ||
| (Intel USB 2.0 Host controller recommended) | ||
| Operating Systems | Windows Vista | 32bit version |
| Windows XP | Service Pack 1, DirectX 9.0c | |
| Windows 2000 | Service Pack 4, DirectX 8.0 | |
* Multiple cameras may require greater system requirements |
||
| ComplEmentAry Models | ||
| 20K14XUSB-C | Standard
resolution USB 2.0 board camera |
|
| 20K14XUSB-CDN | Optional
Day / night function on 20K14XUSB |
|
Note:
Day/Night optical filter (or no filter) options for
maximum sensitivity in B&W mode |
||
| 20K15XUSB-C | High
resolution color USB 2.0 board camera |
|
