|
 |
|
|
 |
||||||||||||||||||||||||
| Electrical | 20K74XUSB NTSC
|
21K74XUSB PAL |
| Image Sensor | 1/4”
IL CCD |
|
| Active Pixels (HxV) | 510
x 492
|
500
x 582 |
| Viewer Display | (USB 2.0, 30fps)
720 x 480 pixels max |
(USB 2.0, 30fps)
720 x 576 pixels max |
(USB
1.1, 30fps) 320 x 240 pixels max |
||
| Sensitivity | <
0.5 Lux (50 IRE) F1.2 3200K, lens transmission 80%,
scene reflection 75% |
|
| Signal To Noise Ratio | >
48 dB (AGC off) |
|
| Gamma | 0.45
default (1.0 via Software) |
|
| Gain Control | Automatic
36 dB (AGC default) or Fixed options via software |
|
| Scan Mode | Interlaced
/ Non Interlaced (selectable via Software) |
|
| Mirror Mode | Selectable
via software |
|
| Synchronization | Internal |
|
| Back Light Compensation | Default
on (selectable via software) |
|
| White Balance Mode | AWB
auto white mode, Fixed modes selectable via software |
|
| Contour Enhancement | Default
on |
|
| Iris Control | CCD
Iris default |
|
| Shutter Speeds | Automatic from 1/60
to 1/100,000 |
Automatic from 1/50
to 1/100,000 |
| 14
fixed speeds via software |
||
| Control Communication | Camera
control via USB bus |
|
| Power Supply | 5VDC
via USB bus |
|
| Power Consumption | <
1.3 W |
|
| Environmental | |
| Ambient Operating Temp. | -15° C to +
55° C |
| Ambient Operating Humidity |
20
up to 93%RH |
| Storage Temp. | -25° C to +
70° C |
| Storage Humidity | Up
to 98%RH |
| Mechanical | ||
| Dimensions (WxHxD) | 50mm
x 50mm x 49.6mm (without lens mount) 1.97” 1.97” x 1.95” |
|
Lens Mounts Example:Change 20K74XUSB to 20K745USB to select an M-12 Board Mount. |
Replace
“X” in model number with desired lens mount option:Software
for entire product family:  |
|
| Cable | 60C1062
- 8.2 ft, 6-pin JST to USB 2.0 |
|
| Accessories | ||
| Included | Metal
mounting plate for top/bottom mounting. Detachable power block for easy installation. |
|
| Optional | 60P24VAC 60PR12DC800 60VZZ0030 |
24VAC power
supply 12VDC power supply C Mount w/adapter ring |
| Software | ||
| Software for entire product family: | •
WDM device drivers Digitally signed by Microsoft® under Windows
XP® • DirectX compliant • TWAIN compliant |
|
Full camera DSP control available for OEMs |
||
| Data Rate | 480
Mb/sec. (maximum) Distance 5m W/repeater 30m |
|
| Installation
Software SFT-04040 |
Camera
Device Driver Viewer (GUI) User's Manual |
|
| SDK SFT-04040-SDK |
Complete
software development kit and support for OEMs |
|
| Minimum System Requirements | ||
A
PC with USB 2.0 compatible port |
||
| Preview Mode | PIII | 1.1GHz or above 128MB of RAM (256MB preferred) DirectX 9.0c or later |
| Windows XP | Service Pack 1 (Service Pack 2 preferred) | |
| Windows 2000 | Service Pack 4 | |
| Capture Mode | Full D1 MPEG 2 | P4 2.4GHz or above |
| 640 x 480 MPEG 2 | P4 2.0GHz or above | |
| 352 x 288 MPEG1 | P4 1.5GHz or above | |
| Hard Disk | 5400RPM (7200RPM preferred) 128MB of RAM (256MB preferred) |
|
| Windows XP | Service Pack 1 (Service Pack 2 preferred) | |
| Windows 2000 | Service Pack 4 | |
Verify
your system has the latest USB 2.0 host driver from Microsoft® only. This product is not guaranteed to operate with a USB2.0 host driver from OWC. |
||
