Color Board Camera

1/4” CMOS Color Board Camera

with 8-Bit DIGITAL YUV & Composite Video Output

  • Click here for high resolution image
  • Click here for high resolution image
  • Click here for high resolution image
  • Click here for high resolution image
20B14X, 20B14XDIG

20B14X | 21B14X | 20B14XDIG | 21B14XDIG

  • 22mm x 26mm mini-board is compatible with previous 20K family products
  • Delivers 8-Bit DIGITAL YUV & composite video output simultaneously
  • I²C software controllable features & functions
  • Up to 4 overlay images can be stored to SPI FLASH (Overlays require special tooling to produce)
  • White balance: AWB and push set
  • Mirror and flip mode option
  • Lens mounts: metal CS, M12 board or pinhole
  • Optional USB model
Electrical
Image Sensor 1/4" CMOS
Resolution (HxV) 640 x 480 (max)
Frame Rate 30fps (NTSC) 25fps (PAL)
Sensitivity < 0.05 lux, (50 IRE) F1.2, 3200°K, lens transmission 80%, scene reflection 75%
Signal to Noise Ratio > 46 dB digital output
Gamma 0.45 default
Gain Control Automatic 36 dB (AGC default) or Fixed options via software
Scan Mode Interlaced
Mirror Mode Selectable via software
Synchronization Internal
Back Light Compensation Default off (selectable via software)
White Balance Mode AWB (fixed modes selectable via software)
Contour Enhancement Default on
Iris Control Electronic Rolling Shutter
Shutter Speed Automatic from 1/60 to 1/100,000 (NTSC)
Automatic from 1/50 to 1/100,000 (PAL)
Video Outputs 8-bit digital YUV 4:2:2 @ CCIR656
CVBS
Control Communication I²C control
Power supply 4.5-12VDC +/- 5% (not polarity protected)
Power consumption < 0.8W
Environmental
Operating Temperature -40°C ~ 50°C (-40°F ~ 122°F)
Operating Humidity 20 up to 93%RH
Storage Temperature -40°C ~ 90°C ( -40°F ~ 194°F)
Storage Humidity Up to 98%RH
Lifetime MTBF > 150,000 hrs
Packaging ESD safe package
Mechanical
Dimensions WxHxD 22mm x 26mm x 11mm without lens (1" x 0.87" x 0.43")
Weight 6.4g (0.23oz)
Lens mounts Replace "X" in model number with desired lens mount option:
Example: To select an M-12 Board Mount Change 20B14XDIG to 20B145DIG
2 = M-12 pinhole mount
5 = M-12 board mount
8 = CS mount
Connectors

Remove analog connector J102 in order to mate directly to Videology USB board
J102 Power/ analog video/ 6pin mount I²C connector
Vertical JST: BM06B-SRSS
J100
Power/ video/ digital YUV, all in a 30 pole board to board connector
MOLEX-501920-3001 Board to Board connector (J102)
MOLEX-52991-0308 Mating part, must be used on the application side
20B14, 20B14DIG dimensions
I²C Communication Kit (Optional)
60B6-U I²C Kit Includes: I²C board, Program cable, USB cable, camera control software
Programming and Test Tool Download
SFT-13500
rev 1.6 compressed folder

Software controllable features & functions

  • Overlay Functions
  • Auto Exposure Settings (AEX)
  • Mirror and Flip
  • White Balance
  • General Communication
  • I²C Addresses
Included 60C1041 8 pin cable with flying leads
Call Videology for Communication Control Options
20B14XUSB 20B14XUSB USB 2.0 dual board camera. This is a direct replacement for the 20K14XUSB family NTSC; 20K142USB, 20K145USB, 20K148USB
PAL; 21K142USB, 21K145USB, 21K148USB