Color Board Camera

USB 2.0 1/4" CMOS Color Board Camera

With USB 2.0 Video Output

  • Click here for high resolution image
  • Click here for high resolution image
  • Click here for high resolution image
  • Click here for high resolution image
20B14XUSB

20B14XUSB | 21B14XUSB

  • 22mm x 26mm mini-board is compatible with previous 20/21K14XUSB-C family products
  • All-digital design uses camera board's digital (D1) output for input to USB board
  • USB 2.0 bus provides power to camera
  • Complete SDK available

Software

  • USB 2.0 viewer software and Microsoft Digitally Certified WDM Device Drivers for 32bit and 64bit Windows operating systems
  • DirectX/DirectShow compliant
  • TWAIN compliant
Electrical
CCD Sensor 1/4" CMOS
Resolution (HxV) 640 x 480 (max)
Frame Rate 30fps (NTSC)
25fps (PAL)
Sensitivity < 0.05 lux, (50 IRE) F1.2, 3200°K, lens transmission 80%, scene reflection 75%
Signal to Noise Ratio > 46 dB digital output
Gamma 0.45 default
Gain Control Automatic 36 dB (AGC default)
Scan Mode Interlaced
Mirror Mode Selectable via software
Synchronization Internal
Back Light Compensation Default off
White Balance Mode AWB
Contour Enhancement Default on
Iris Control Electronic Rolling Shutter
Shutter Speed Automatic from 1/60 to 1/100,000 (NTSC)
Automatic from 1/50 to 1/100,000 (PAL)
Video Outputs USB
Control Communication USB
Power Supply USB 2 bus
Power Consumption < 0.8W
Environmental
Operating Temperature -15°C ~ 55°C (5°F ~ 131°F)
Operating Humidity 20 up to 93%RH
Storage Temperature -25°C ~ + 70°C ( -13°F ~ 158°F)
Storage Humidity Up to 98%RH
Lifetime MTBF > 150,000 hours
Packaging ESD safe package
Note: Camera is not USB 1.1 compliant
Mechanical
Dimensions WxHxD 22mm x 26mm x 16mm without lens (1" x 0.87" x 0.63")
Weight 19g (0.67oz)
Lens mounts Replace "X" in model number with desired lens mount option:
Example: To select an M-12 Board Mount Change 20B14XUSB to 20B145USB
2 = M-12 pinhole mount
5 = M-12 board mount
8 = CS mount
Connectors Camera board
30 pin to USB board (J100) MOLEX-501920-3001
USB board 6 pin JST, power & data (J1)
Standards RoHS
20B14XUSB dimensions
Viewer (included)
SFT-07019
  • WDM device drivers
  • DirectX/DirectShow compliant
  • TWAIN compliant (requires driver installation)
SDK (optional)
SFT-07019-SDK
Complete software development kit and support for OEMs
Minimum System Requirements Hardware Pentium IV 2.3GHz +, 1GB hard drive, Intel USB 2.0 Host controller
Software Windows 7, 8, 10 32 bit and 64 bit
Windows Vista 32 bit and 64 bit
Windows XP Service pack 2 +, DirectX 9.0c or above
Software Downloads
SFT-07019
rev 1.0.160 compressed folder
Latest USB 2.0 viewer software and drivers for 32bit and 64bit Windows operating systems (not Microsoft Digitally Certified)
SFT-07019-WHQL
rev 1.0.129S compressed folder
Microsoft Certified USB 2.0 viewer software USB 2.0 viewer software and Microsoft Digitally Certified WDM Device Drivers for 32bit and 64bit Windows operating systems.
SFT-10011
rev 2.1.25 compressed folder
TWAIN Data Source for Videology USB Cypress cameras.
Optional USB 2.0 cable 60C1062 8 ft. (2.4384m)
60C1062-1 40 in. (1.016m)
60C1062-2 12 in. (304.8mm)
60C1062-3 6 in. (152.4mm)
60C1062-4 15 ft. (4.572m)
20/21B14XDIG 20B14XDIG YUV digital and composite video output board camera. This is a direct replacement for the 20K14X and 20K14XDIG family (NTSC; 20K142, 20K145, 20K148, 20K142DIG, 20K145DIG, 20K148DIG and PAL; 21K142, 21K145, 21K148, 21K142DIG, 21K145DIG, 21K148DIG)