Color Board Camera

CMOS 1.3 Megapixel Sensor Color Board Camera

  • Click here for high resolution image
  • Click here for high resolution image
  • Click here for high resolution image
  • Click here for high resolution image
24C1.3XDIG

24C1.3XDIG

  • Progressive Scan, 1.3 Megapixel Sensor With RGB Color Filter
  • 15fps At Full 1280 x 1024 Resolution Uncompressed
  • Mirror Mode Option
  • Delivers 8-bit, or 10-bit Digital YUV & RGB Video Output
  • Software Controllable Features & Functions via I²C
  • Ultra Small Board 22mm x 26mm

Videology's 1.3 megapixel digital BT656 output board camera, model 24C1.3XDIG, is the recent board of choice for front-end reference design packages and camera designers wishing to capitalize on the board’s transfer efficiency.

Electrical
Sensor 1/3" CMOS
Viewer Display 1280 x 1024 max
Frame Rate 15 fps at 1280 x 1024 uncompressed
Sensitivity < 1.0 Lux (50 IRE) F1.2, 3200K, lens transmission 80%, scene reflection 75%
0.4 Lux (30IRE), 5fps
Signal to Noise Ratio >45 dB (AGC off)
Gamma 0.45 default (1.0 via software)
Gain Control AGC default (selectable via software)
Synchronization Internal (crystal controlled)
Control Communication Camera control via I²C bus
Backlight Compensation Selectible via software
Contour Enhancement Default on
White Balance Auto/manual (selectable)
Scan Mode Progressive scan
Mirror Mode Selectable via software
Horizontal Flip Selectable via software
Contrast Selectable via software
Brightness Selectable via software
Dynamic Range 68 db
Iris Control Electronic (iris signal for lens drive available)
Shutter Mode Electronic rolling shutter
Shutter Speed 1/frame rate to <1/100,000
Fixed shutter speeds selectable via software
Video Output BT656, 8-bit, or 10-bit digital YUV or RGB
Power Supply 5VDC ±5% (not polarity protected)
Power Consumption <275mWatt
Environmental
Operating Temperature -15°C ~ 55°C (5°F ~ 131°F)
Operating Humidity 20% up to 93%RH
Storage Temperature -25°C ~ + 70°C (-13°F ~ 158°F)
Storage Humidity Up to 98%RH
Lifetime MTBF >150,000 hrs
Packaging ESD safe package
Mechanical
Dimensions WxHxD 22mm x 26mm x 16mm (without lens mount)
Lens mounts Replace "X" in model number with desired lens mount option:
Example: To select an M-12 Board Mount Change 24C1.3XUSB to 24C1.35USB
2 = M-12 pinhole mount
5 = M-12 board mount
8 = CS mount
Connectors Molex 52991-0308-Mate
On board 53916-0304
Safety Standards RoHS
24C1.3XDIG dimensions
24B1.3XUSB-C 24B1.3XUSB-CB&W single board camera with USB video output
24C1.3XUSB 24C1.3XUSBColor double board camera with USB video output
24C7.38USB 24C7.38USBColor box camera with USB video output
24C7.38USB-F-L8 24C7.38USB-F-L8Color box camera with USB video output and Flash option