Megapixel Board Camera

CMOS USB 2.0 1.3 Megapixel Sensor Color Board Camera

  • Click here for high resolution image
  • Click here for high resolution image
  • Click here for high resolution image
  • Click here for high resolution image
24C1.3XUSB

24C1.3XUSB

  • Progressive scan, 1.3 megapixel CMOS sensor
  • >12.5fps at 720p high definition uncompressed resolution
  • USB 2.0 bus provides power and camera control
  • Complete SDK available

Software

  • USB 2.0 viewer software and Microsoft Digitally Certified WDM Device Drivers for 32bit and 64bit Windows operating systems
  • DirectX/DirectShow compliant
  • TWAIN compliant
  • Select Linux driver available
Electrical
Sensor 1/3" CMOS
Viewer Display 1280 x 1024 max
Max Frame Rates (Uncompressed) 7.5 fps @ SXGA (1280 x 1024)
12fps @ XGA (1024 x 768)
25fps @ VGA (640 x 480)
Data rate 480 Mb/sec. (maximum), Distance 5m w/repeater 30m
Sensitivity < 2.0 Lux (50 IRE) F1.2, 3200K, lens transmission 80%, scene reflection 75%
Signal to Noise Ratio >45 dB (AGC off)
Gamma 0.45 default (1.0 via software)
Gain Control Automatic 36 dB (AGC default) or Fixed options via software
Scan Mode Progressive scan
Mirror Mode Selectable via software
Shutter Mode Rolling shutter
Control Communication Camera control via USB bus
Syncronization Internal
Back Light Compensation Default on (selectible via software)
White Balance Mode AWB auto white mode, Fixed modes selectable via software
Contour Enhancement Default on
Iris Control Electronic shutter
Shutter Speeds Automatic
Fixed
(NTSC) 1/12 to 1/100
(PAL) 1/15 to 1/120
Video Output USB 2.0
Power Supply 5VDC via USB 2.0 bus
Power Consumption < 0.6W
Environmental
Operating Temperature -15°C ~ 55°C (5°F ~ 131°F)
Operating Humidity 20% up to 93%RH
Storage Temperature -25°C ~ + 70°C (-13°F ~ 158°F)
Storage Humidity Up to 98%RH
Lifetime MTBF >150,000 hrs
Packaging ESD safe package
Mechanical
Dimensions WxHxD 22mm x 26mm x 16mm (without lens mount)
Weight 48.5g (0.107lbs) with M-12 mount
Lens mounts Replace "X" in model number with desired lens mount option:
Example: To select an M-12 Board Mount Change 24C1.3XUSB to 24C1.35USB
2 = M-12 pinhole mount
5 = M-12 board mount
8 = CS mount
Connectors USB board connector: (6 pin) power & data
Safety Standards RoHS
24C1.3XUSB dimensions
Optional USB 2.0 Cable 60C1062 8 ft. (2.4384m)
60C1062-1 40 in. (1.016m)
60C1062-2 12 in. (304.8mm)
60C1062-3 6 in. (152.4mm)
60C1062-4 15 ft. (4.572m)
Viewer (included)
SFT-07019
  • WDM device drivers
  • DirectX/DirectShow compliant
  • TWAIN compliant (requires driver installation)
SDK (optional)
SFT-07019-SDK
Complete software development kit and support for OEMs
Minimum System Requirements Hardware Pentium IV 2.3GHz +, 1GB hard drive, Intel USB 2.0 Host controller
Software Windows 7, 8, 10 32 bit and 64 bit
Windows Vista 32 bit and 64 bit
Windows XP Service pack 2 +, DirectX 9.0c or above
Software Downloads
SFT-07019
rev 1.0.160 compressed folder
Latest USB 2.0 viewer software and drivers for 32bit and 64bit Windows operating systems (not Microsoft Digitally Certified)
SFT-07019-WHQL
rev 1.0.129S compressed folder
Microsoft Certified USB 2.0 viewer software USB 2.0 viewer software and Microsoft Digitally Certified WDM Device Drivers for 32bit and 64bit Windows operating systems.
SFT-10011
rev 2.1.25 compressed folder
TWAIN Data Source for Videology USB Cypress cameras.
SFT-15002
rev 77 compressed folder
.NET Wrapper DEMO software
24B1.3XUSB-C 24B1.3XUSB-CB&W single board camera with USB video output
24C1.3XDIG 24C1.3XDIGColor single board camera with digital video output
24C7.38USB 24C7.38USBColor box camera with USB video output
24C7.38USB-F-L8 24C7.38USB-F-L8Color box camera with USB video output and Flash option